Recommended Products for Terrazzo Floors

Generally when you see a white smudge, ring, spill mark, spot or dirt on marble, limestone, travertine, concrete or terrazzo it is either hard water or an etch. If it is smooth it is an etch. If it is crusty and above the surface it is hard water, but if it is crusty and below the surface it is a bad etch. These are very different issues, neither of which can be addressed with a cleaner, and both require professional service. No cleaner is going to restore a smooth, appropriate colored, mark-free surface – the GOOD NEWS is MARBLELIFE can restore your surface to like new

White Dirt = Etches - White spots, rings spill marks

An acid has come in contact with your acid-sensitive hard surface and dissolved a mark into your surface. No cleaner can remove this mark. It must be professional corrected.

Marble, limestone, travertine, the marble chips in terrazzo are all made of Calcium Carbonate. Calcium Carbonate is acid sensitive. Acids will react with CaCO3 to form a salt and CO2, and that salt is water soluble, meaning that this by-product to acid attack is washed away by water or a cleaner.

Generally, acid is introduced in one of the following manners:

1. Cleaning with vinegar
2. Spritzing lemon or lime making a drink
3. Cutting lemon, lime or tomatoes directly on this surface
4. Spilling salad dressing or spaghetti sauce on this surface
5. Spilling pickle juice on this surface
6. Or CLEANING WITH A CLEANER THAT CONTAINS ACID/
7. Mistaking an etch for a hard water deposit and using a hard water deposit remover (strong acidic) to remove it, making it substantially whiter (worse).

Etches can be corrected. This requires the damaged area to be re-honed smooth and then re-polished and re-sealed.

This is NOT something you want to do yourself, as additional damage can be done during the honing and during the polishing stage if not done correctly, if one does not understand that processes and the reason they are being used.

If you have ever cleaned this surface, only to see the marks come back later, this is another symptom of an etch. This is the result of the fact that etch is no a low spot in your surface that collects and pools cleaner. When the surface begins to evaporate the shallower depth of cleaner on the unmarred surface evaporates away before the deeper portion filling in your etch. Light can bounce true off the surface of the liquid in the etch giving it the appearance of having disappeared, but once the evaporation process is complete the etch returns as the light can no long bounce true.

The good news is that etch damage can be 100% repaired. The surface needs to be re-leveled and then re-polished to restore a surface that is so smooth that light can bounce off it true (to restore your gloss appearance), and the white salts and crushed stone has been removed.

You will need a professional craftsman to restore this damage. CALL MARBLELIFE, to discuss your situation, secure an estimate, restore your finish, and learn how to avoid and care for this surface without creating additional damage/

Products
No cleaner will resolve this problem, BUT once restored you will want to be sure to utilize a product that contains no waxes, oils or acids, else you will risk re-creating the problem.

MARBLELIFE’s cleaners are formulated with our restoration root cause knowledge in mind. MARBLELIFE MARBLE & TRAVERTINE cleaner will provide an exceptional acid-free cleaner capable of quickly providing a clean, streak-free, oil-grease and fat-free surface.

Speak to an expert 888-218-4616

White in color these are often shaped like water droplets on glass, however if allowed to go unaddressed will expand to form a crusty mass on the surface as seen in this example where the calcium has formed a blanket of white chalky build-up. Good news, this can be addressed.

White Hard Water

White in color these are often shaped like water droplets on glass.

Created when “hard” calcium rich water is allowed to evaporate. These hard deposits require different treatments depending on the surface. Acids will dissolve them but will also dissolve marble, limestone and travertine making this an in appropriate removal process.

On Calcium based surfaces such as Marble, Limestone or Travertine – you will want a professional to remove without damaging the surface. On granite, metal or glass use lemon juice.

Speak to an expert 888-218-4616

Do you clean with Vinegar? This this one is for you. Vinegar has many benefits – but cleaning is really not one of them. The downsides created with cleaning with an acid accumulate with time to generate an expensive restoration bill. Its recommendation, is based on inappropriate wives tales.

Marble, limestone, Travertine, Terrazzo and concrete are all acid sensitive. Vinegar is acidic. If you are cleaning your floor with vinegar, you WILL see a loss in shine that accumulates over time as you slowly move from a gloss finish to a matte finish, You will also see a generally lightening of the tile color, while grout lines begin to darken particularly in high traffic areas. The grout color change can be offset if you original color was dark gray or black which will begin to soften and lose their color depth.

GOOD NEWS! We can restore your surface to its original appearance, and provide you an appropriate non-damaging replacement for your vinegar cleaner.

Dull spots (vinegar)

TILE – Marble, limestone, terrazzo and concrete will all react to vinegar poorly. Ceramic and Porcelain are acid-resistance and will not be damaged in this way BUT their grout is not so fortunate (See the section on grout staining below)

Vinegar will react with CaCO3 in these products to form a water dissolve-able salt, which is then washed away by the water in your cleaner. This creates micro-pits in your smooth tile surface, in effect roughening the surface and reducing its ability to bounce life true. These micro-pits appear lighter as a result of residual salt dust which is generally white in color providing the appearance of a lighter floor that is often confused with “cleaning” effect.

GROUT – Grout includes dyes that can be removed with acid. Grout is also generally sealed with a penetrating sealer. These sealers are acid sensitive, such that they can be forced back to their unreacted raw materials and then washed away over time by the water in the cleaner. When this happens your grout’s pores are once again opened and capable of absorbing dirt and oils resulting in grout appearing stained as dirt enters and resides in these pores. The rate of damage is slow – and as such – it is often only after many applications does not realize there is a problem, but that problem will require a profession service to fix.

First – Stop cleaning with vinegar – it is creating the need for a restoration the cost of which will vary based on length of use and degree of accumulated damage.

Second – Shift to a surface-safe cleaner (see Products below) Third – Contact a professional stone or tile restoration company such as MARBLELIFE to discuss what may need to be done to reverse the damage and restore your beautiful cleanable surface.

GROUT – Grout will generally need to be colored, have the remnants of any seal removed, have a new acid-resistance colored seal installed to restore an unstained, color uniform, cleanable grout surface resistant to future damage (even if one cleans with vinegar again).

TILE – Marble, Limestone, Travertine, Concrete and Terrazzo tile surfaces will need to be re-polished to restore color and desired finish. This will require the assistance of a professional craftsman. DO NOT WAX – as this will provide a short-term solution, but long-term will create its own problems and increase the cost associated with resolving the damage.

MARBLELIFE can restore a CLEANABLE surface to you, and provide you guidance on the appropriate cleaners and cleaning strategies to avoid a repeat problem later.

Products
Once restored, clean with MARBLELIFE MARBLE & TRAVERTINE cleaner for marble, limestone and travertine.

Use ENDURA-CLEAN for Concrete and Terrazzo surfaces.

MARBLELIFE FLOOR CLEANER CONCENTRATE – Can be used for marble, limestone, travertine, concrete and terrazzo floors. This product is also suitable for ceramic and porcelain surfaces.

Formulated to be free of Wax, oils and acids to provide a exceptional cleaning, without damaging the cleanability of your surface.

IMAGES – Need image of a uniformly dull marble floor to gloss polish.

Speak to an expert 888-218-4616

Lack of gloss or shine in the traffic areas where people normally walk. GOOD NEWS! We can restore a consistent new appearance to your tile.

Dull spots (wear)

Overtime all hard surfaces wear with foot traffic. This generally takes the form of dull areas in the walk paths with micro-scratches and scratches. As this is damage to the surface, it can be cleaned but cannot be corrected with a cleaner. When sand, dirt or hair are trapped underfoot down pressure can be multiplied as it concentrates at this single point, versus being spread out across the full surface of your shoe enabling a person to scratch the surface of even the hardest floor surface material. Over time, with each foot step the entire surface can dull.

Wax may hide them, but in doing so this band-aid solution creates its own downstream problems. Being softer than the original surface it is easer to damage and tends to capture dirt.

What is needed is to grind the surface to remove the micro scratches and restore a smooth finish free of scratches and damage. A professional stone craftsman will be required to perform this operation. Once done the surface will once again be cleanable having been restored to like-new.

Contact MARBLELIFE to schedule a service to have your stone restored.
MARBLELIFE will hone the surface to remove damage, and then re-polish to restore color and desired gloss.

Speak to an expert 888-218-4616

Carpet adhesive remaining when a terrazzo treasure is found to be hidden under an old carpet or vinyl floor. Celebrate – Your building is about to increase in value!

CARPET ADHESIVE REMOVAL

Terrazzo floors have been around far longer than the techniques to restore a damaged terrazzo floor. In the 1950s, 60s and 70st was not uncommon for beautiful terrazzo floors to be covered with carpet or vinyl tile when they became worn.

Today, as we re-gentrify some of our older buildings and neighborhoods and we look to replace worn carpet and dated vinyl, these old masterpieces are coming to light. Today we can restore these surfaces back to pristine and beautiful in a matter of hours. Adhesives can be removed and terrazzo floors can be restored to their original glory adding tremendous value to the building and restoring its historic nature.

Once cleanability has been restored, MARBLELIFE can direct you to appropriate non-damaging care products suitable to your terrazzo floor, such as MARBLELIFE MARBLE & TRAVERTINE CLEANER.

Prior to the development of terrazzo restoration sciences one was forced to cover worn terrazzo with carpet or vinyl, which was glued down with adhesive.

Adhesives can be stripped away, to reveal the old and worn terrazzo floor, which today can be restored to its former glory when new. CALL MARBLELIFE

Once adhesive has been removed, MARBLELIFE can repair any chips or cracks that may present, hone out any wear or scratches in the antique surface, and re-polish to its original beautiful appearance.

The net result is a home or building with greater value, and greater historical interest. Carpet and vinyl were desperation solutions that reduced the building value. A terrazzo entrance way or floor is a durable, wear resistant surface that offers beauty and historic value and meaning.

Speak to an expert 888-218-4616

Red in color, deposited from iron rich water as it evaporates

Red Rust

Red in color, deposited from iron rich water as it evaporates

Removed with acid, however acid will damage many underlying surfaces and grout, as such best addressed by a professional

If rust stains appear on marble, travertine or limestone call a professional as most solutions will do damage during the removal process which then need to be repolished or otherwise reversed to return a clean red-free surface.

Speak to an expert 888-218-4616

Floor is slippery when walking across it.

Slippery

Slip requires the presence of a moveable material in the form of oil or dust, on top of a surface that lacks sufficient roughness to resist movement.

Contrary to popular notions – a shiny surface is not necessarily slippery. That said, it is true that generally a smooth surface has a smaller coefficient of friction making it easier to slip when dust or water are present or introduced. That said, different materials have different coefficient of frictions as such the application of wax to a surface will often reduce its coefficient of friction making to more slippery. Similarly the introduction of oils to enhance gloss appearance will result in a more slippery surface.

Similarly, one can slip on what is considered a rough surface – A car traveling at speed can hydroplane on a road when the surface is wet. The water is the moveable media in this case.

As such, one can reducing slip by maintaining a dry, dust free-surface, by removing waxes, and resisting the use of oils to enhance appearance in preference to managing the surface characteristics directly.

Solutions will vary based on the particulars of your situation including surface type, surface modifications, cleaning strategies, sealing conditions and the presence of wax.

Change in floor finish, topical coatings or the introduction of non-skid media in the form of a coating or tape may all contribute to reduction, but are not suitable in all conditions.

It is recommended that you have a professional craftsman review the particulars of your situation to ascertain specific recommendations.

Products
When it comes to cleaning floors in a manner to reduce the incidence of slip it is generally safe to say that the most important consideration is establishing a frequency based on the expected introduction of dust and water to the surface. The frequency needed can be modified through the use of appropriate matting, selecting mats based on what is needed most and may require use of multiple types to address debris versus water.

Surface modifications should avoid the use of waxes which can modify coefficient of slip to be too high as well as too low.

Surface finishes can be a factor by increasing roughness of the surface.

There are no universal recommendations here as one needs to formulate a strategy consistent with one’s use and surroundings.

Speak to an expert 888-218-4616